Eye Protection Design:
The panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you can also watch laser engraving without wear goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles.
The all-aluminum alloy anodized structure design makes the machine more durable, and the assembly can generally be completed within 20-30 minutes.
Super High Power:
World's first 20W optical power laser engraver. The laser output power soars up with the latest generation of four 6W laser coupling technology, is able to cut off 12-15mm thick tungsten board as well as the 8mm thick black acrylic board with only one pass, and even cut the 0.05mm thick stainless steel sheet.
Upgrade Air Assist Kit:
The cutting capacity is greatly improved, as well as the cutting accuracy and quality is optimized to a considerable extent.
No need to adjust the focus before engraving. The focusing spot area of the new laser is only 1/3 of other ordinary lasers. Combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser.
Precise Scale Lines Axis:
There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 400x400mm large area engraving interval can meet your various engraving needs.
The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP/ 7 /8 / XP / 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF etc.
Uses an integrated screw rod which makes the movement of the laser more precise and the coupling more durable. Support offline engraving; In the event of an unexpected situation, stop the machine at any time to make the engraving safer. The laser sintering temperature is up to 2400℃.
Model: ATOMSTACK X20 PRO
Recommend Print Size: 400x400mm
Carving Objects:Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective, Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate;
Cutting Objects:Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge;
Machine Power: 130W
Laser electric power: 90W
Laser output power: 20-21W
Wave Length: 445 ± 5nm
Engraving accuracy: 0.01mm
Focusing method: fixed focus laser, no need to focus
Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot.
Operating software: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10 system.
Input Format: NC, BMP, JPG, PNG, DXF, etc.
Data transmission method: USB connection.
Input Voltage: AC100-240V, 50/60Hz
Output Voltage: DC12V, 5A
Package Size: 57 x 52 x 18cm/22 x 20.4 x 7in
Package Weight: 10.6kg/23.3lb
1 x Air Assist Accessory
1 x Mounting Screw
1 x Tool Kit
4 x Foot Pad Foam
1 x Film
3 x Acrylic Sheet
3 x Wood Chips
10 x Wire Tie
1 x Desiccant
1 x Brush
1 x Clean Cloth
1 x Card Reader
1 x TF Card
1 x Power Adapter
1 x Instruction
1 x Data Line
1 x Touch Screen Components
1 x High Definition Multimedia Interface Cable
1 x Laser Module
1 x Cutting Pad
1 x x Axis Assembly
1 x y Axis Left Profile
1 x y Axis Right Profile
1 x Profile On The Base
1 x Under The Base Profile
3 x Foot Bracket